Were does your wand lay on the truck when your finished with a job?

Mine just laid in back of the truck, leaking SH mix all over till I came up with a quick fix.

I used a piece of PVC pipe with an end cap on it.

Ok..... now I found after a week of the SH solution building up in the tube, My QC and nozzles 

were getting corroded.

Drat!!!!!

But wait.....   BLEACH WASH!!!!!!!

Now I put some clean water in the tube, and an ounce or so of Bleach Wash.

I change this out every few days..... Well OK more like once a week.....

Now my QC and nozzles stay in GREAT Shape, Thanks to Bleach Wash.

* Pic1 - Wand in the tube on the truck

* Pic2 - Wand "with two banger" next to the tube

I hope this helps or even inspires some one to expand upon it and make it better.

    Chris