Best Procedure for Running Bleach Wash Through Craddle Skid
Gregg Austensen said
Nov 4, 2012
Heys Guys,
What have you found to be the best process for running BW through the system at the end of the day so that all areas are neutralized? Running it throught the Pentaflex and spray line is straight forward but I remember AC saying that some mix or what ever you're running through system will dump back into the mix tank to protect the pump. If I'm pulling BW through the multi tap won't the BW go into my mix some and weaken it?
I don't see a way to run BW through the tank hoses unless they are empty. Maybe it does'nt matter if they are neutralized since they are cheap to replace compared to the pump.
Thanks!
Gregg
AC Lockyer said
Nov 4, 2012
Run one 5 gallon bucket of clear water through using the multi-tap and then another 5 gallon bucket of water with 6 ounces of bleach wash in it. Make sure you add the bleach wash last to avoid suds that will cause your pump to cavitate. The entire system, valves, pump head, hose reel and 300' of hose hold 5 gallons.
Heys Guys,
What have you found to be the best process for running BW through the system at the end of the day so that all areas are neutralized? Running it throught the Pentaflex and spray line is straight forward but I remember AC saying that some mix or what ever you're running through system will dump back into the mix tank to protect the pump. If I'm pulling BW through the multi tap won't the BW go into my mix some and weaken it?
I don't see a way to run BW through the tank hoses unless they are empty. Maybe it does'nt matter if they are neutralized since they are cheap to replace compared to the pump.
Thanks!
Gregg
AC