Stripping a deck tomorrow and I start loading up my deck supplies including a shurflow I use to put on my stripper and brightener...then I think I have this new fatboy on the back of my rig and it should work fine.
What are your thoughts out there about me running Sodium Hydroxide and then Citralic through the same pump I use SH and BW for.....I would think there are no worries as long I run clean water through the pumps when I switch between chems. Neither the Hydroxide or the Citralic will see the inside of my SH tank or BW tank.
-- Edited by Jeff Thompson on Tuesday 14th of May 2013 07:06:51 PM
AC Lockyer said
May 15, 2013
Hydroxide OK cause its a base. Not oxhalic or citric because they are acids. Pump may go bang.
AC
Jeff Thompson said
May 15, 2013
Thanks AC !
AC Lockyer said
May 15, 2013
Once you have used a pump for either an acid or base you should dedicate that pump for those liquids in a simular PH.
Stripping a deck tomorrow and I start loading up my deck supplies including a shurflow I use to put on my stripper and brightener...then I think I have this new fatboy on the back of my rig and it should work fine.
What are your thoughts out there about me running Sodium Hydroxide and then Citralic through the same pump I use SH and BW for.....I would think there are no worries as long I run clean water through the pumps when I switch between chems. Neither the Hydroxide or the Citralic will see the inside of my SH tank or BW tank.
-- Edited by Jeff Thompson on Tuesday 14th of May 2013 07:06:51 PM
AC
AC