Could someone please tell me where I can find these 20/40 and 0/20 fan tips in brass for my Home depot wand. I must of stopped at 15 different places today after I got everything I needed for this wand at Menards. All I need is the little brass fan tips for the 1/2 inch wand setup. Does anyone know were I can at least order these online from someone. Any feedback would be great. I am almost up and running. Thanks guys.
Get 1 extra of each piece for your wand. At some point the wand will fall from the roof and the riser will break where it attaches to the tip at the quick connect
Mark Fermoyle said
May 21, 2013
Shaun,
I get my "brass" tips at www.PressureParts.com . They are far superior to stainless steel tips as far as producing an even pattern.
Mark
Shaun Harton said
May 21, 2013
Thanks Mark, I just ordered some from Bill at the Powerwash store. I only ordered a few to start out with. I would like to test them out and find out which patterns are best with my pump GPM. I am using a 1.7 GPM sureflow 8000 pump. I know its small, but its a starting point. LOl. I should have my liability insurance next week and also start the modules I wanted to take. This is taking a bit longer to get things going than I thought it would. Working 65 hours a week at my other job does not help either. LOl.
AC Lockyer said
May 23, 2013
JRC has them also. They come from Bill through JRC so you get to bless both companies.
Could someone please tell me where I can find these 20/40 and 0/20 fan tips in brass for my Home depot wand. I must of stopped at 15 different places today after I got everything I needed for this wand at Menards. All I need is the little brass fan tips for the 1/2 inch wand setup. Does anyone know were I can at least order these online from someone. Any feedback would be great. I am almost up and running. Thanks guys.
Call Bill @ The Power Wash Store.
Or go on their website, http://shop.powerwashstore.com/Soap-Spray-Tips_c94.htm
David
Great , Thank you David.
I get my "brass" tips at www.PressureParts.com . They are far superior to stainless steel tips as far as producing an even pattern.
Mark
Thanks Mark, I just ordered some from Bill at the Powerwash store. I only ordered a few to start out with. I would like to test them out and find out which patterns are best with my pump GPM. I am using a 1.7 GPM sureflow 8000 pump. I know its small, but its a starting point. LOl. I should have my liability insurance next week and also start the modules I wanted to take. This is taking a bit longer to get things going than I thought it would. Working 65 hours a week at my other job does not help either. LOl.
AC